Why Do You Need a UPS System?

Even brief power outages can result in data loss or potential hardware damage. A UPS system provides battery backup power to keep your devices running during short outages and provides enough runtime to properly shut down electronics during extended outages.
Main hotspot image

Workstations

Ensure seamless power to workstations and make certain you have time to safely shut down systems during a longer outage.

Network Devices

Keep smart devices connected and running during power outages and brownouts.

Corporate & Department Servers

Protect mission-critical IT equipment and data centers from potential data loss and costly business interruptions.

 
OR1000PFCRT2U
 
OR1000PFCRT2U
Price
Battery Power
1000
1500
2000
Watts
700
1050
1540
Runtime (Half/Full)
17.9/6.6 Minutes
17.7/7.7 Minutes
15.5/4.5 Minutes
Battery & Surge Protected
8 Outlets
8 Outlets
8 Outlets
AVR
LCD Screen
Topology
Line Interactive
Line Interactive
Line Interactive
Waveform
Sine Wave
Sine Wave
Sine Wave
Model Type
Rack/Tower
Rack/Tower
Rack/Tower
Management Software
PowerPanel Business
PowerPanel Business
PowerPanel Business

Product Q&A

How long will the UPS power my systems after the power goes out?

Run times vary based on the power required by connected devices. This unit is estimated run for 17.9 minutes at half load, 6.6 minutes for a full load. The LCD screen provides an estimated run time based on the required power usage during blackouts.

Can this UPS model be monitored?

Yes, the OR1000PFCRT2U comes with a free download of PowerPanel Business that provides a user-friendly dashboard interface for controlling and monitoring the UPS.

Can the batteries be replaced?

Yes, this unit can have the batteries replaced. The replacement battery cartridge is the CyberPower RB1290X4H.

Does this come with rackmount hardware?

Yes, all CyberPower rackmount units come with the necessary hardware to mount the UPS. However, the unit does not have to be mounted to work. It can operate in any well-ventilated environment within 32 °F to 104 °F (0 °C to 40 °C).

How do I mute the alarms?

Press the SELECT button for 3 seconds to access the Audible Alarm within the set-up mode functions. Use the same button to select OFF within the Audible Alarm function and hold for 3 seconds to mute the alarm. Repeat this step to enable the alarms.

Proposition 65 Warning:

This product can expose you to chemicals including Styrene, which are known to the State of California to cause cancer, and Bisphenol A (BPA), which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.