This Multi Battery Adapter Kit is for NP-FX100 Z-series batteries and also supports versatile use. Primarily it quickly charges up to four NP-FZ100 batteries.1 This adapter can also supply power to a camera that uses Z- or W-series battery. Moreover, it provides two USB ports and can simultaneously send electrical power to both a camera and a device connected, for example, via the USB ports.
Two NP-FZ100 batteries are included in the kit.
For extended shooting
This battery adapter can load four NP-FZ100 Z-series batteries and supports extended shooting.
Supply power to a camera compatible with Z- or W-series2 battery
This Multi Battery Adapter Kit can connect and supply electric power to a camera that uses either an NP-FZ100 Z-series or NP-FW50 W-series2 battery. By removing the cover for Z-series battery (figure [A]), the power plate (figure [B]) fits cameras compatible with W-series battery.
Quickly charges NP-FZ100 batteries
This battery adapter can quickly charge up to four NP-FZ100 Z-series batteries3 via AC adapter within about 480 minutes4. Power charge condition is indicated in a 3-level LED when the "remaining battery power" check button is pressed.
Select power supply or battery charge
DC OUT/CHARGE switch placed at the center of the control panel allows you to choose either supplying power from the batteries or charging the batteries.
Equipped with two USB ports for power output
Camera/USB selector enables switching between DC OUT destinations to let you choose to supply electrical power to either the camera body or other electronic devices connected via USB ports.5.
Setting flexibility for varied shooting scenes
This battery adapter provides three screw sockets on both top and bottom of the unit (a total of 6 sockets), allowing a flexible rig setup using a mounting plate and screws.
Turn into a more compact size
If you remove battery protector and put battery port covers into place, Multi Battery Adapter turns into a smaller easy-to-carry adapter for two batteries.
Sony customer reviews
September 07, 2017
Really close to great
MNPNW, Seattle, WA, United States:
Right to the one thing I wish was different; fixed cable for the "Plug-in Plate." For travel, one can always take the small single battery chargers; however, it would have been nice to haul the Multi Battery Kit instead. On the plus side, taking several single battery chargers means you have a spare.
I'll probably attach it to my camera stand in studio and leave it there.
Naturally, does the job of charging batteries well. Continue Reading...
footnote2For supported models, click the link to compatibility information page.
footnote3NP-FW50 W-series batteries cannot be charged with this battery adapter.
footnote4As charged electricity reaches more than 90% of the battery capacity, charge lamp turns off to indicate “normal charge”. If charging continues for another approximately 160 minutes (in case of four batteries), battery power condition reaches “full charge” allowing even longer use.
footnote5Illustration shows an example of how the adapter supplies electric power to a camera via DC OUT A while supplying electric power to another device via USB port of DC OUT B.